The Allison 10L1000 10-velocity transmission is the heavy-duty automatic for Chevy Silverado and GMC Sierra Hd vans. That means it is a stout, even though elaborate transmission, capable to get the included load the Duramax diesel engine puts out. It has the maximum relative torque potential of any full-measurement truck created. But problems have cropped up which we’ll protect now.
GM debuted the 10L1000 transmission in 2020 pickups. It changed the Allison 1000 and 2000 6-pace automated in 2001 to 2019 GM Duramax vehicles. Ford and GM jointly developed the 10-pace. Internally, the 10L1000 and Ford’s TorqShift 10R140 are virtually similar. Areas are interchangeable amongst the two.
Most of these troubles take place owing to aftermarket purposes. A lot of major-duty truck house owners want tuning adjustments or more substantial tire measurements to personalize and beef up their GM heavy-obligation vehicles. That is when quite a few of these difficulties will pop up.
Silverado and Sierra High definition automatic torque converter weaknesses
The primary situation plaguing the Allison 10-pace is the torque converter, in accordance to NextGen Diesel. Or extra particularly, the lockup mechanism. Ford’s edition, which has established top-quality, has a lockup mechanism that faces the stator. Conversely, GM’s version has it struggling with the flexplate.
There is a good line for the transmissions the place when almost everything is stored inventory, it performs adequately. All the things is effective high-quality until finally electric power stages exceed the 500 hp manufacturing unit quantities. That or rising tire dimensions. Then, transmission failure is commonly the result.
In the situation of tire dimension, the rear end gears require to be changed to coincide with manufacturing facility ratios. With aftermarket electricity increases, you must go with a billet multi-friction torque converter that can manage the excess output.
The inferior stator in the Silverado and Sierra Hd transmission
The stator controls stall pace and is positioned within the torque converter. Stall speed is the pace at which the torque converter restrictions engine speeds. It restrictions the electric power transferred to the transmission. But it can also elevate temperatures in the transmission. Heat administration difficulties can be a dilemma for major-responsibility Allison automated transmissions even given that the before 1000/2000 6-velocity automatics.
Given that the stator is inside of the converter, replacing the total torque converter with a more powerful aftermarket edition normally will increase the trustworthiness of the 10L1000. Costs array from all-around $1,000 and up. Replacing the torque converter is a reasonably very simple approach as lengthy as you have a elevate. Usually, it would be finest to have it changed skillfully.
Allison 10L1000 oil pan leaks
As with many factors made from skinny sheet metal or plastic, warmth and use take their toll on the transmission pan. When this happens, the slender metallic can deform and cause leaks to seem. It comes about with quite a few transmission and oil pans, and also valve handles. Aftermarket transmission pans are normally made from thicker or reinforced aluminum or metal, reducing warping from heat/cold cycles. These aftermarket pans ordinarily operate all over $300 and are further, to improve oil potential, much too.
Linked: The GMC Sierra’s Turbo-Diesel Engine Is Overengineered for Sturdiness
More Stories
Toyota Automatic Transmission: Shifting Gears with Precision
8-Speed Transmission: Navigating the Road to Efficiency and Performance
Add Another One To The Stick Shift List — The 2023 Acura Integra Will Get A Manual Transmission!